Create a multi-use flexible cargo restraint solution with LoadLok garment panels. Use them for Garment on Hanger or create a flexible double decking system (with beams).

FashionLok GTS Panels

LoadLok GTS Panels are available in many variations and are designed to meet the individual requirements of the customer. Standard GTS panels are 3mm thick anodised aluminium, 2mm thick mild steel. Pre-galvanized panels are also available. 

All panels can be supplied with or without kick plate and fixing holes. In addition, our CNC facility allows complete design flexibility and enables us to produce standard rectangular and shaped panels up to 1,5 meter wide with varied hole pitch and design. 

Our High Density (HD GTS) panel increases the available garment rail position by some 40% compared with the standard panel. GTS Panels should be installed allowing a minimum gap of 25mm between the rear of the panel and the trailer wall to ensure easy insertion and removal of the garment rail. In combination with a decking beam, the GTS panel can also be used for second decking.

FashionLok Keyhole panels

LoadLok keyhole panels are available in many variations and are designed to meet the individual requirements of the customer. Standard Keyhole panels are 3mm thick anodised aluminium. 2mm thick mild steel pre-galvanised panels are also available. 

In addition, our CNC facility allows complete design flexibility and enables us to produce standard rectangular and shaped panels up to 1,5 meter wide with varying hole pitch and design. Keyhole panels should be installed allowing a minimum gap of 21mm between the rear of the panel and the trailer wall to ensure easy insertion and removal of the garment rail.